Stucco Installation
New three-coat stucco over wood frame, block or an existing substrate, built to spec and finished in the texture you choose.
See detailsServices
Stucco Services in PLACEHOLDER City, ST
Installation, repair, crack work, re-coats, EIFS and architectural trim — all done in-house by a locally owned crew with 21+ years in PLACEHOLDER County.
20+ years in business
Plastering since 2005, same crew leads on every job.
Locally owned
One shop, one service area, no franchise call center.
Highest-rated crew in the area
Referral work and repeat GC clients make up most of our schedule.
Services
Every stucco service we offer
Everything from a single blown-out corner to a full three-coat system on new construction. If it is cement plaster or synthetic, it is what we do all day.
Stucco Repair
Patching, water damage, blown corners and old bad repairs, blended so the fix does not read as a patch.
See detailsStucco Crack Repair
Diagnosis comes first: hairline shrinkage, movement cracks and structural cracking each need a different repair.
See detailsStucco Re-Coat & Refinishing
A fresh finish coat over sound existing stucco. New color, new texture, old patches disappear, no demolition involved.
See detailsEIFS & Synthetic Stucco
Acrylic finish systems over rigid foam board — installation, plus repair of the moisture problems the older barrier systems are known for.
See detailsStucco Painting & Color Coat
Fog coats, integral color finishes and breathable elastomeric coatings, prepped properly so they actually bond and last.
See detailsFoam Trim & Architectural Details
Window surrounds, banding, quoins, corbels and column wraps, shaped in EPS foam, base-coated, meshed and finished to match.
See detailsCommercial Stucco
Retail, multifamily, office and tilt-up work, bid off the plan set and scheduled around every other trade on the job.
See detailsHow the wall gets built
Three coats, in order, no shortcuts
Traditional hard coat stucco is a system, not a coating. Each layer does a job the next one depends on, which is why the sequence and the cure time matter more than the speed.
COAT 00
Prep and lath
Weather barrier lapped correctly, weep screed set at the right height, casing bead at every opening, then metal lath fastened to the framing. Inspection happens here, before anything is covered.
COAT 01
Scratch coat
The first cement coat keys through the lath and gets raked horizontally so the next layer has something to grab. This is the bond the whole wall depends on.
COAT 02
Brown coat
Floated flat and true to establish the plane of the wall. Every imperfection you would see in the finish gets fixed at this stage, then the coat is cured, not rushed.
COAT 03
Finish coat
Color and texture, applied continuously across each elevation so there is no lap line. You approve the texture sample on your own wall before we mix a single batch.
Service area
Where we work
We stay inside PLACEHOLDER County and the towns around PLACEHOLDER City on purpose. A tight radius means we can get back out to a job the week you call instead of the month after.
Stucco in Mesa
Mesa runs the full range from concrete block ranch homes built in the 1950s and 60s to sprawling master-planned communities finished in the last fifteen years, so stucco work here has to account for two very different eras of substrate and two different sets of texture expectations. The valley's caliche-heavy soil and the swing from chilly overnight lows in January to well over 110 degrees by July put real stress on any finish coat that was not cured correctly the first time.
Stucco in Gilbert
Gilbert went from farm town to one of the fastest-growing suburbs in the Valley in about two decades, so most of the stucco stock here is wood-frame construction from the 1990s onward rather than the older block housing found closer to Phoenix. That newer build-out leans heavily on one-coat and synthetic systems over foam board, which handles our monsoon wind-driven rain differently than a traditional three-coat wall does.
Stucco in Chandler
Chandler mixes older 1980s and 90s tract housing on the north side of town with newer lake-community construction built around Ocotillo's man-made waterways, so a crew here needs to be comfortable matching both eras of texture on the same job. The higher water table and irrigated landscaping near the lakes also means we pay closer attention to weep screed height and drainage than we would on a typical dry-lot property.
Stucco in Tempe
Tempe's housing stock skews older than most of the East Valley, with single-story block ranch homes from the 1950s through the 70s clustered near Papago Park and Arizona State University, plus a wave of denser infill and multifamily stucco construction closer to downtown. That mix means we see everything from decades-old sand finish that has already been re-coated more than once to brand new synthetic stucco on newer buildings.
Stucco in Scottsdale
Scottsdale covers more architectural ground than almost anywhere else we work, from mid-century modern homes in Old Town finished in smooth troweled stucco to large custom builds near the McDowell Sonoran Preserve with heavy foam trim and Santa Fe or Mission-style detailing. Intense, near-constant sun exposure on the open desert lots to the north fades color faster here than almost anywhere else in the Valley, which shapes how we spec a finish coat.
Stucco in Queen Creek
Queen Creek is one of the newest build-outs in the Valley, so nearly everything we touch here is wood-frame construction from the last fifteen years using one-coat or synthetic stucco over foam board rather than traditional three-coat cement plaster. Larger lots and a fair number of equestrian properties mean more linear footage of wall and perimeter fencing to detail than a typical subdivision lot closer to the urban core.
Common questions
Questions we get asked in PLACEHOLDER City
Price comes down to square footage, wall height and access, how many openings need detailing, and whether we are working over new frame, over block, or over an existing wall that has to come off first. We measure every elevation and give you a written scope so you can compare bids line for line.
Yes. We come look at the actual walls in PLACEHOLDER City and the surrounding area, take real measurements, and send over a written scope. Nothing gets quoted off a photo alone.
Over 21 years. We are locally owned, we only take on work inside our actual service area, and most of our schedule fills up from referrals and repeat general contractor clients rather than cold leads.
Yes. Current license and certificates of insurance are available on request before any work begins.
Traditional stucco is cement plaster applied in three coats over metal lath, hard, heavy and impact resistant. EIFS is rigid foam board with a mesh base coat and a flexible acrylic finish, better insulating value, lighter, and much more dependent on getting the flashing details right.
Cement plaster cures with moisture rather than by drying out, so our low humidity, summer heat and the wind-driven rain that shows up during monsoon season all factor into scheduling. We work most of the year and plan the finish coat around the actual forecast instead of pushing it into bad conditions.
Get a straight answer on your wall
Free on-site estimates across PLACEHOLDER City and PLACEHOLDER County. We look at the actual wall, measure the elevations and send a written scope — no charge and no sales pitch.